The Five Legged Table in Provence and Kona

Ok…. so the title of this post sounds a little like a weird Indie film title… oh well … I think the tale of this table is so long it could be made into a short Indie film… who would they get to star as me… covered in sawdust… stain… gunk I don’t even know what it is… not many women I know.. maybe if the part was written for a man!

Perfect guy for the job.. MIKE ROWE…

Mike Rowe as ME!

This is a nasty, dirty job most of the time and I pretty much looked like the picture of Mike above.. FUN times πŸ˜‰

On to the tale of the TABLE…

This table was listed as a “paint me” special at a local shop…. I of COURSE fell in love with it immediately because of her GORGEOUS legs… she is mahogany and has no missing parts (if you don’t count the missing leaves, which I don’t ’cause they are always missing, umm.. is there a special place where all of the missing socks and table leaves go to be found later?)

The Top:

The MOSTLY Before of the Top

She had some pretty good-sized scratches on the top, but I was hoping to be able to sand them out and stain the top.. my backup plan was to paint the top.. I told myself there was NO WAY I was removing the veneer… I sanded the top down and had to fill one tiny scratch that was just too deep, I then stained the top Kona, I had to use two coats…. after the first coat some of the scratches were still visible, but once the second had been applied they virtually disappeared.. man did that make me happy!

Now, for the apron..
She had a lot of allergatering (can I use this word in this way? sorry if not, but that is what was happening!) I started out sanding the apron with the orbital sander and that worked great, except for the areas near the top and the bottom molding.. I tried to use my mouse sander for those areas, but the poly just kept melting on the sandpaper and gunking it up.. so the table sat for a while I thought of how next to tackle it. My next thought was to use a stripper (as a side note I do love it when my husband calls me and asks what I’m up to and I can honestly tell him “stripping in the garage”.. hee.. hee, look it’s the little things that keep you going right?) Anyway.. I did two applications of the stripper, it took a lot of it off, but still left goopy areas that I was having a hard time getting to, not to mention getting off so…

Yummy Gunk & Trim

My final solution (partially based on the fact that some of the veneer was loose) was to remove the trim molding (intact, to be reattached later) remove the veneer and use the wood underneath..

My Veneer Removing Tool of Choice

Now some of you may know that depending on the age of the piece you will still have a VERY good quality wood under the veneer.. I was totally banking on that! So I removed the veneer, which could have been a much worse job than it was, and sanded the apron with 80 / 100 / 150 / 220 sandpaper, in that order. The wood was beautiful.. and in great shape..

Beautiful Wood Apron

I applied a coat of Kona stain and let it dry. Meanwhile I removed the old nails & gunk from the apron trim piece and sanded it down to reattach. I applied some glue, clamped it on and nailed the piece to the table using the original nail holes. I had to trim it down when I got to the end because the circumference of the table had changed with the removal of the veneer, by 1 1/2″! After I filled the nail holes & sanded the trim piece I then stained it to match the rest of the top.

After everything was stained and dry I applied a couple of coats of polyurethane to the top and apron.

Whew! Now the base..

So PURDY!!!

She got a good sanding (again the allergating) and two coats of ASCP in Provence.

Bringing Sexy Back!

We have a had a run of nice weather here recently so I was able to take her outside to sand her down and blow her off with the blower (love that!) I put a coat of clear wax on the base and then I painted a few areas on the legs with an accent stripe in Old Ochre and then buffed her down.

Old Ochre Stripe

Oh yeah, almost forgot… she also got some new wheels.. the original ones were missing (went to hang out with the socks & leaves I guess :0) so I replaced them with some wood ones that I think would have been similar to the original wheels.

Replacement Wooden Wheels

The End Result….
I love this table… it’s funky legs, the color combination, the wheels and the fact that it was resurrected to provide many more years of happiness for someone! The top is not “showroom” perfect but it is as good as it can get… and it really does look great!

Dining Table – After
Finished Table in Basement Kitchenette

I would love to hear what you think about her… I love comments πŸ˜‰

Thanks for stopping by!

Linking Up to These Parties!

Primp

Savvy Southern Style

Domestically Speaking
The Shabby Creek Cottage
House of Heoworths
French Country Cottage
Miss Mustard Seed
My Romantic Home
Funky Junk Interiors
Sisters of the Wild West
Between Naps on the Porch
Coastal Charm
Vintage Wanna Bee
A Stroll Thru Life

47 thoughts on “The Five Legged Table in Provence and Kona

Add yours

  1. I am very impressed with your abilities! You have helped me to learn something here. I have recently gotten the bug and have been sanding a few pieces here and there. Stripping you can have….I don’t like it. But I guess there are some instances where you have to.

    Great job! Love the pretty blue legs!

    β™₯charlotte

    Like

    1. Lee,
      Loved your table… that looked like a lot of work too! Thanks for checking out my table! By the way we have a Schnoodle too.. he’s Wookie colored, always looks like an old man with crazy eyebrows! I’m a new follower of yours!

      Like

  2. Wonderful! I love the coloring on the legs you chose and how you finished them. Of course the top looks beautiful with it’s new finish. It looks like it was a big project- excellent job!
    I think you have a very valuable piece there now!

    Like

  3. Beautiful!! I’ve been thinking about refinishing our dining room table but wasn’t sure what to do about the veneer. Now I know!! Thanks for sharing!

    Found you on Funky Junk Interiors
    Visiting from leahkoenig.blogspot.com

    Like

  4. Seriously inspiring, your srptep by step makes the project feel achievable (minus the removing and reattaching of the veneer of course! That just scares the hell out of me) haha
    Thanks for sharing! I’m in love with the color scheme.

    Like

A comment for me, really? Thanks so much!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Blog at WordPress.com.

Up ↑

%d bloggers like this: