So let me tell you about what it looked like before.. The table was finished in a light maple stain and it had no defects other than a few light surface scratches… so other then being outdated it was in great shape and it even had a leaf!!!
I bought the table for my oldest daughter, who will be living off campus next year as a Sophomore at Radford University, I didn’t think about the fact that most of the apartments wouldn’t have any dining rooms… Where will they eat all of those gourmet meals they will be preparing ? I was so excited about being able to contribute to her first apartment… all I had for my first apartment was my bed, a dresser and a bean bag chair.. no joke!
So the table is not a keeper… It turned out to be a custom paint job for a client who had some chairs, but no table so it all worked out in the end. My Aunt helped me out on this project and together we stripped, sanded and applied 3 coats of Special Walnut stain to the top. The base we painted with two coats of Duck Egg chalk paint, lightly distressed, waxed with Provence tinted wax and then buffed it. I decided to wax the top as well, so two coats of wax and a good buffing and the table was done. I really love the way a table top looks when it is waxed. Also, it is so easy to care for if something should happen to it… perfect for families with kids!
Just a tiny bit of distressing…
No Weimaraner’s were harmed during this photo shoot, so don’t let him tell you otherwise! He just likes to sleep in the sunshine… cutie!
Just check out her Cabriole legs!
Now this sounds like it was an easy project, but I had a ton of problems with the stripper. I used Citristrip, which I have used before, but something went wrong and I’m not sure what happened. First of all the stripper never really dried and was the consistency of mucus when I went to remove it… HUGE, nasty mess! Then when I went to wipe it down with mineral spirits I just couldn’t get everything off of the surface and every time I started to sand the top the sandpaper got all gunked up with crud that I couldn’t see on the table, but it was obviously there…. So I let the table top dry out for a couple of days and hand sanded the top for the first pass, then used the electric sander with 220 grit paper. Now this same problem occurred with two other table tops I was stripping the same day! Ugh! I would rather sand than use stripper… it’s a preference thing for me… so if you are reading my posts you will now know why I’m just sanding away at a top, it’s actually one of my favorite things to do when I’m refinishing a piece… just sayin’!
I’d love to hear what you think so why not leave a comment!
Thanks for stopping by!
Parties I’m Linking Up To!
Crafty, Scrappy, Happy
Miss Mustard Seed
My Romantic Home
French Country Cottage
Chic on a Shoestring
Classy Clutter
Funky Junk Interiors
Sisters of the Wild West
Between Naps on the Porch
Primitive and Proper
Coastal Charm
Restore Interiors
Domestically Speaking
Savvy Southern Style
Hi Susan,
That is an absolutely lovely table! Great work! Looks so smooth. . .
I refinish and paint furniture for a living as well. I have had the CitriStrip do that on a few occasions, too, and it is one big mess! I bet it was just a hard-core varnish they used and refused to come off easily. I had a desk about the same age (with cabriole legs!) and it did the same thing. I had to strip it twice (slinging mucus each time!) and then sand and sand like you did.
Your finished product made the work worth it! Your daughter is lucky.
Geri
LikeLike
well thank goodness I am not the only one who experienced that problem! Thought I was going crazy! Thanks for letting me know Geri!
LikeLike
That turned out so pretty – makes me want to paint something, anything, that color!
Visiting from Crafty, Scrappy, Happy…
LikeLike
Hi Susan! What a beautiful table! I will be pinning this to my “Paint it Annie” inspiration board! I had the same experience you did the one time I used Citristrip…ugh! It was a mess and I almost threw in the towel! What is the deal? Anyhow, I love how your table turned out!
Best Wishes and Blessings,
Amanda
LikeLike
Thanks Amanda! Based on some other comments we were not alone with our Citristrip problems…
LikeLike
It is beautiful. I love seeing all the ASCP furniture.
LikeLike
I gave up on the supposedly-safe strippers years ago. Way too much waiting and too much clean up afterward, not to mention the unpredictability, to make a project worthwhile. I use a heat gun to do the majority of my stripping. I honed my skills stripping all of the molding when we were restoring our house, and I love how much control I have with my heat gun. Warm the finish, and scrape it off with a 5-in-one tool. Sometimes, when stripping varnish, I will use a carbide pull scraper. After the heat gun, there’s very little sanding to do, which is much better on the wood. (Have you ever noticed that the slightest clog on the sandpaper on your sander will sometimes make a nasty pattern of scratches on your tabletop? That’s why I sand AFTER I strip, no stripper, no water, just heat.)
Radford? You must be close by. I’m in Fredericksburg.
Great to visit, and your table turned out fabulous!
LikeLike
Hey Connie! I am close, I’m in Richmond, near Short Pump Town Center… Ok, so I don’t have a heat gun, but I’m going to try it next time. What brand heat gun do you recommend? I HATE using stripper so much! It’s just a yucky, messy pain! I so appreciate you giving me this advice, wonderfully nice of you! Next week’s weather is going to be gorgeous in VA!
Susan
LikeLike
Hi Susan,
I love this restyle!! It’s too bad you ran into a few snags along the way but the end result is great. I look forward to reading your posts I just subscribed to your blog 🙂
LikeLike
You are AWESOME.. thanks for subscribing, but even more thanks for the compliment!!
LikeLike
Thank you so much for following my blog and for your nice compliments!
LikeLike
Wow, SO pretty! Your doggie is darling too! I’d love if linked up to my little party: http://www.nutmegplace.com/2012/03/showoff-saturday-5.html
Hope to see you there!
LikeLike
Thanks Meg! I will head over and check it out! Don’t let my dogs cuteness fool you.. that face is what made us bring him home the little trouble maker 😉
LikeLike
the table is lovely. I’m avoiding stripping any table top due to either laziness or fear, but I admire people like you who do!
LikeLike
If I can do it you can do it! The worst that could happen is that you would have to paint it if you mess up.. worth a try!
LikeLike
Stripping furniture is such a pain. The problem with the citristrip could have been low humidity. I used it once on a very big project while living in Arizona (land of low humidity) and had the same issues. I found that I just really had to lay it on thick and let it turn into that funky gel. That gave it more time to soften and work into the finish you are wanting to remove.
Lovely results, your table is gorgeous!
LikeLike
Thanks for the 411! I will totally keep that in mind for next time!
LikeLike
What a lovely table! I just used Duck Egg Blue for the first time recently. Such a pretty color. I have an island I’m going to strip in the near future. I’m not going to lie, I’m very nervous….
LikeLike
Very lovely piece. Have a great weekend!
LikeLike
Very nice..I haven’t been brave enough to try to the blue on a table such as this one..but my chance is coming up very very soon (getting the table this week) YIPPIE..you just gave me the confidence I needed. Good job. Visiting via Crafty Crappy Happy
LikeLike
Oh, I think you will love it! I know I did, just such a nice change from black or white! Have fun & good luck!
Susan
LikeLike
Beautiful!
… well done! The table looks great 🙂
Greetings from Australia♥
LikeLike
Thank you for stopping by and checking out my table! And a shout out from the USA to you!
LikeLike
Your table is gorgeous! I love the wood top with the blue legs and you got the blue just right. It’s exactly the shade the top needs. And I love how subtle the distressing is! So pretty! I would love if you linked it up to my party if you have a minute!
http://daysofchalkandchocolate.blogspot.com/2012/03/latest-and-greatest-22-and-bed-crown.html
LikeLike
Thanks Jenny! I will stop by and. He k out your party! Thanks for the invite!
LikeLike
what brand of special walnut stain?daughter has first apartment after college and she loves the french look. but mom still gets to do the work. lol did you ever find out what heat gun they were talking about and how to do. this is my first time trying this kind of paint. wish me luck.
LikeLike
Mary,
Thanks for taking a look at my table! I used Minwax brand stain in Special Walnut and I have emailed to see if I can get more information on the heat gun… I super interested too! Good luck!
LikeLike
Mary, this is what Connie from Hartwood Roses had to say “It’s made by Milwaukee, and I got it in the paint department at Lowes. It’s
the cheapest one they sell, I think. Two heat settings, does everything I need it to. The best thing about it is that it’s super lightweight …which is a consideration when using it for hours on end..” I also recommend checking out her blog where she has some great information!
LikeLike
Visiting from Between Naps on A Porch and I just wanted to tell you how much I love this idea! Your table is beautiful!
Thanks for sharing and for great inspiration.
blessings,
karianne
LikeLike
Thanks Karianne! I appreciate you taking the time to check her out, I thinks she’s a beauty too 😉
Susan
LikeLike
Love it! Happily following! Can’t wait to see more!
LikeLike
Thank You Kennesha! I love to get new followers!
LikeLike
so pretty! i love that color on the base- it suits the style perfectly!
LikeLike
Thanks Cassie! You are always so supportive!
LikeLike
Great job on the table! Looks fantastic! My son is also a freshman at Radford, I’m in Richmond–Midlothian area. I’m just starting to work on some furniture and I read that you used provence wax– can I purchase that locally? The Annie Sloan is fine, but I have to order it and I hate waiting and paying shipping charges.
LikeLike
I wish I could get the paint local too! I’m trying to convince the owners of Class & Trash to be a distributor! If you feel motivated, call them and talk to Kenny or Lisa about it… I think it would be great for them and for us! I think there is a distributor near Radford (I’ve been tempted to get my daughter to pick some up) too, but I get mine from a distributed in NJ… Ugh! Good luck and keep in touch!
LikeLike
Beautiful color on this table!
LikeLike
Very Pretty!
LikeLike
Gorgeous! Lucky gal! Love this table – it is stunning! I would love if you stopped by my Creative Inspirations party opening up tonight at 10 pm EST to link this great project up! I would loove to have you there!
Stacey of Embracing Change
http://staceyembracingchange.blogspot.com
LikeLike
Thanks Stacey! I missed the party last week but will be sure to catch it this week!
LikeLike
I have also experienced that problem but have had really good results on some pieces. Crazy I tell ya. When I got gunky results I used a fine steel wood pad wet with mineral spirits then set the piece in front of a fan for a few days (ok 2 days) then I sanded and stained. Have you tried CeCe Caldwell Chalk Paint?
LikeLike
I have Smokey Mountain and Spring Green in the CeCe paint! I did a post with the SM on my Thomasville coffee table, check it out! Thanks for letting me know I’m not alone 😉
LikeLike
I love Smokey Mountain! I love CeCe so much I became a retailer. Check out my website. http://www.ShabbyDaze.com I’ll be ready for on-line orders in the next couple of days!
LikeLike